Click on image to zoom
HAMILTON CAMS 07-C-188/220 CAMSHAFT
- For Larger Singles & Compounds
- Best All-Around Performance Camshaft
Note: Zinc additive required
The Hamilton Cams 07-C-188/220 Camshaft for your 1989-2015 Dodge 5.9L/6.7L Cummins, has outperformed any other cam that Hamilton has tested against to date, from idle to 4,200 rpm. It is also the largest drop-in cam that Hamilton offers.
Use with 62mm or larger single turbos or larger twins. Install intake on a 99 centerline, performance springs and pushrods are recommended. If you have had your head or block surfaced, you need to verify piston to valve clearance.
For it to be "drop in" on a 12v you will need no more than .018" piston protrusion and at least .055" valve face depth with a standard head gasket and a 99 intake centerline. On a 24v you will need no more than .018" piston protrusion and at least .038" valve face depth with a standard gasket. If you do not meet the minimum requirements for piston to valve clearance, don't worry, you can still run an oversize headgasket or cut valve reliefs.
- Item Requires Shipping
Total Reviews (0)
Write the First Review!
You must login to post a review.